Contact Information:
Nancy Lee
Hengshui JingTong Engineering Rubber Co.,LtD
Add:Nanwangzhuang village,Hengshui City,Hebei Province,China
Tel/Fax: +86-318-2877988|Phone:+86-15731809416(WhatsApp)
Skype: tradingnancy
2015年3月17日星期二
Hydrophilic construction joint waterstop
PZ waterstop is a new type hydrophilic watertight product manufactured of quality vulcanized rubber and other additives, which make it expansible with physical properties of rubber. Comparing with bentonite waterstop and butyl rubber waterstop, this one has following characters:
Features & benefits:
- High watertight properties - once exposed to water, PZ waterstop will expand one to five times to fill all irregular surfaces, holes and spacing of surrounding concrete. Meanwhile, if the construction joints are displaced which will result in oversized gaps beyond elastic range of waterstops, traditional waterstop will lose its effect of water-proofing, but our PZ waterstop still performs great by continual swelling.
- Much stronger taking advantages of cross-linked chemical structure at the atomic level.
PZ strip waterstop - Smaller size but uncompromising water swelling property.
- Eliminate elastic fatigue caused by excessive compression.
- Excellent water resistance, chemical resistance and anti-aging property.
- Easy and quick to install.
- Slow expansion type is also available as your request.
Applications:
- Pipe penetration.
- Water reservoirs.
- Settling pond.
- Deformation and concrete construction joints of civil engineering.
- Water conservancy and hydropower projects, etc.
Properties:
| Physical properties | PZ-150 | PZ-250 | PZ-400 | PZ-600 | |
|---|---|---|---|---|---|
| Hardness (shore A) | 42±7 | 42±7 | 45±7 | 48±7 | |
| Tensile strength | 3.5 Mpa (min) | 3.5 Mpa (min) | 3 Mpa (min) | 3 Mpa (min) | |
| Elongation | 450% (min) | 450% (min) | 350% (min) | 350% (min) | |
| Expansion rate | 150% | 250% | 400% | 600% | |
| Repeated water immersion test | Tensile strength | 3 Mpa (min) | 3 Mpa (min) | 2 Mpa (min) | 2 Mpa (min) |
| Elongation | 350% (min) | 350% (min) | 250% (min) | 250% (min) | |
| Expansion rate | 150% | 250% | 300% | 500% | |
| Low temperature bending(-20°C*2h) | No crack | No crack | No crack | No crack | |
Note:
- Avoid exposing the PZ waterstops to moisture environments.
- Clean, level and dry the surface of concrete before installation.
Sizes:
15 mm × 20 mm, 20 mm × 30 mm, 20 mm × 50 mm, 30 mm × 50 mm, 10 mm × 40 mm or others as your request.
15 mm × 20 mm, 20 mm × 30 mm, 20 mm × 50 mm, 30 mm × 50 mm, 10 mm × 40 mm or others as your request.
Package:
- 15 mm × 20 mm and 20 mm × 30 mm: 25 meters / box.
- 30 mm × 50 mm: 10 meters / box.
Your nominated types of packages are also available.
PZ strip waterstop - high water absorption property
A coil of packed PZ strip waterstop before boxing
Contact Information:
Nancy Lee
Hengshui JingTong Engineering Rubber Co.,LtD
Add:Nanwangzhuang village,Hengshui City,Hebei Province,China
Tel/Fax: +86-318-2877988|
Phone:+86-15731809416(WhatsApp)
Skype: tradingnancy
HDPE Waterstop
Why You Need HDPE Waterstop In Fuel Areas?
HDPE waterstop, also a kind of plastic waterstop similar to PVC waterstop, are made of quality high density polyethylene materials with high chemical resistance when exposed to hydrocarbons, acids, hot petroleum oils, solvents and diesel fuels, etc. However, the HDPE waterstop is harder, more abrasion and heat resistant than PVC waterstops.
A coil of HDPE waterstop
Features & benefits:
- Strong and durable.
- High resistance to elevate and low temperature.
- Excellent anti-abrasion.
- Superior resistance to chemical liquids, hydrocarbons, acids, solvents, oils, fuels, and other non-polar fluids, etc.
- Resistant to oxidants and reducing agents.
- Not prone to swell and be flexible.
- Easy to butt-weld to form a continuous diaphragm.
Application:
- Perfect for primary and secondary containment structure.
- Sewage treatment facilities.
- Fueling areas.
- Mining and refineries facilities.
- Chemical plants
- Liner application
Installation:
In conjunction with brass eyelets, punched flanges or hog rings, tie wires to surrounding reinforcing bars to prevent the waterstop from displacing during the concrete pour. For changing directions, pre-fabricated waterstops are recommended.
Properties:
| Physical properties | Test methods | Minimum value |
|---|---|---|
| Specific gravity | ASTM D-792 | 0.941 |
| Hardness shore A | ASTM D-2240 | 90 ± 3 at 25°C (77°F) |
| Tensile strength | ASTM D-412 | 4000 psi |
| Ultimate elongation | ASTM D-412 | 750% |
| Low temperature brittleness °F (°C) | ASTM D-746 | -148 (-100) passed |
| Chemical resistance | ASTM D-471 | Meet even exceed |
| Softening | - | 154°F |
Note:
- Not recommended for applications in oxidizing acid circumstances, for example, nitric, chloro sulfonic and fuming sulfuric, etc.
- Polyethylene will dissolve at high temperature in hydrocarbons and halogenated hydrocarbons such as toluene, xylene, or chlorinated solvents.
Contact Information:
Nancy Lee
Hengshui JingTong Engineering Rubber Co.,LtD
Add:Nanwangzhuang village,Hengshui City,Hebei Province,China
Tel/Fax: +86-318-2877988|Phone:+86-15731809416(WhatsApp)
Skype: tradingnancy
订阅：
博文 (Atom)